FAQ

06 Finish Printing

Printer Setting Step 1 : Thread the filament through the break detector.   Step 2 : Pull the trigger under the extruder, insert the fliament from the bottom until they reach the hotend.   Step 3 : Click the nozzle sign to preheat the nozzle to 200℃.   Step 4 : Click the adjustment button at the bottom of the interface, wait until the temperature reaches 200℃, and then click load material.   Step 5 : Click until the nozzle extrudes well.   Changing Filament Step 1 : Click the nozzle sign to preheat the nozzle to 200℃.   Step...

Leer más →


07 Slicer Installation

Step 1 : Insert the U disk to find the rose3d.zip compressed package, copy it to the computer storage disk, and decompress it.   Step 2 : After the extraction is completed, find the rose3d icon and click to open the rose3d slicing software.  

Leer más →


08 Get Printing Models

Step 1 : You can use common modeling software to design your own model, export it to STL format and import slicing software   Step 2 : Model can also be downloaded on some websites: www.thingiverse.com www.myminifactory.com www.cults3d.com   Step 3 : Click Import model to select the 3D model you want to print (STL file), or directly drag the model into the slicing software.

Leer más →


09 Slicing Setting

Step 1 : Click Import model to select the 3D model you want to print (STL format), or directly drag the model into the slicing software.   Step 2 : On the left, you can resize the model parametrically. Right click the model to open more options, copy, empty and center, and automatically place the model.   Step 3 : After adjusting the model, click the slice button in the lower right corner, and import the slice file. Gcode file into the flash drive.   Step 4 : After adjusting the model, click the slice(generate G code) and export the...

Leer más →


10 Slicing Introduction

Build Plate Adhesion Type Set the type of the first layer of model printing to adapt to different printing requirements. skirt To ensure the extrusion is good and fluent brim Contact with the bottom of the model, better adhesion at the bottom raft Add a thick base plate at the bottom of the model   Layer height Set the thickness of each layer of the printing model to get different surface effects and printing speed 0.02mm This parameter will make the surface of the printed piece layer lines invisible 0.1mm Printing time and surface accuracy more balanced options 0.2mm Printing...

Leer más →