09 Slicing Setting

Step 1 :


Click Import model to select the 3D model you want to print (STL format), or directly drag the model into the slicing software.


Step 2 :


On the left, you can resize the model parametrically.

Right click the model to open more options, copy, empty and center, and automatically place the model.


Step 3 :


After adjusting the model, click the slice button in the lower right corner, and import the slice file. Gcode file into the flash drive.


Step 4 :


After adjusting the model, click the slicegenerate G codeand export the Gcode file to the USB flash drive.


Step 5 :


Adjust adhesion type and support type according to different print models.


Step 6 :


Click the plus sign to add a new slice setting profile, and then you can set the parameters below.