09 Slicing Setting
Step 1 :
Click Import model to select the 3D model you want to print (STL format), or directly drag the model into the slicing software.
Step 2 :
On the left, you can resize the model parametrically.
Right click the model to open more options, copy, empty and center, and automatically place the model.
Step 3 :
After adjusting the model, click the slice button in the lower right corner, and import the slice file. Gcode file into the flash drive.
Step 4 :
After adjusting the model, click the slice（generate G code） and export the Gcode file to the USB flash drive.
Step 5 :
Adjust adhesion type and support type according to different print models.
Step 6 :
Click the plus sign to add a new slice setting profile, and then you can set the parameters below.