09 Slicing Setting

Step 1 :

Click Import model to select the 3D model you want to print (STL format), or directly drag the model into the slicing software.

 

Step 2 :

On the left, you can resize the model parametrically.

Right click the model to open more options, copy, empty and center, and automatically place the model.

 

Step 3 :

After adjusting the model, click the slice button in the lower right corner, and import the slice file. Gcode file into the flash drive.

 

Step 4 :

After adjusting the model, click the slice（generate G code） and export the Gcode file to the USB flash drive.

 

Step 5 :

Adjust adhesion type and support type according to different print models.

 

Step 6 :

Click the plus sign to add a new slice setting profile, and then you can set the parameters below.